Fiber proof testers are created to use a set load to Optical Fiber Proof-Testing Machine in order to test the strength of the spliced Fiber. Our Fiber proof testers are available in both linear and rotary styles, for both proof and tension screening. Fiber proof testers are accessible for single setting, multimode, and polarization-maintaining fibers. Choose from devoted, stand alone techniques or multi-purpose designs which can be also competent at stripping, cleansing, cleaving, splicing, and recoating.
Fiber Recoaters with Proof Testers provide easy, incorporated answers to recoat and check fusion-spliced fibers. The Fiber recoating process restores the buffer coating to your stripped Fiber, offering more versatility compared to a heat-reduce protection sleeve, enabling so that it is handled and coiled with no damage to the combination-spliced area. The incorporated linear or rotary Proof tester enables customers to right away test a recoated Fiber having a pre-determined weight and determine the long-term reliability of the Fiber. Because of the ability to recover a combination-spliced Fiber to near initial condition, these techniques are best for applications like undersea visual Fiber wires, submarine interaction wiring, Fiber lasers, or Distributed Bragg Reflector (DBR) lasers.
This process begins with the fusion-spliced portion of Fiber being positioned in the middle of the mold set up (see image towards the right). Once set constantly in place, inserts inside the Fiber blocks secure the spliced Fiber set up. Recoat materials is motivated in to the cavity then Ultra violet-treated. The recoated Fiber can then be analyzed by pulling into it as much as a pre-decided weight.
Recoater and Mold Assembly Choices – Recoaters can be purchased with either a computerized or manual mold assembly. The automatic mold assembly functions pneumatic control over the mold plates and it is optimized for high-volume production programs. Handbook mold assemblies, on the other hand, use easy-to-open mold dishes that provide much more flexibility and are best for low-volume manufacturing or RAndD applications. A computerized or manual volumetric dispensing pump and shot system is used to inject the recoat material into the mold cavity.
The SZ Stranding Line comes regular with a mold set up for Ø430 µm coated materials; For your manual recoaters (Product #s PTR206, PTR206B, PTR307, and PTR307B), the mold assembly comes individually to ensure that clients can choose the right mold covering size for his or her program. Custom mold covering dimensions can be found up to Ø900 µm. Pre-setting up the mold set up on the factory is additionally readily available. Get in touch with Technology Support for more information on custom molds or factory set up.
We provide each high-directory (Product # AB950200) and reduced-directory (Item # PC373) recoat materials to use during these recoaters. Recoaters with handbook injection pumps (Item #s PTR206B and PTR307B) are compatible with each varieties of recoat material; all the other recoaters are suitable for the high-directory material only. Our handbook recoaters with the automatic injection program (Item #s PTR206 and PTR307) can be personalized to work with both low- and high-index recoat materials; make sure you contact Tech Assistance for additional information.
Proof Tester Choices – The PTR206, PTR206B, and PTR208 Fiber Recoaters include an integrated linear Proof tester, that can take the Fiber up to and including predetermined load (20 N) and after that produces it. The linear Proof tester utilizes the same Fiber keeping obstructs as the recoater and thus the Fiber fails to must be moved just before screening. The PTR307 and PTR307B Fiber Recoaters have an incorporated rotary Proof tester, which can perform both Proof and stress assessments (?89 N). One set of Proof check grips is included; replacement Proof check grips are available listed below in packs of 10. Each testing procedure is completely programmable through the included handset or tablet controller, allowing qyjflh consumer to choose parameters like the weight, the rate at which the burden is used, and also the hold time.
Inserts for Fiber Keeping Obstructs – As well as the previously mentioned, we provide many different inserts to use in the Fiber keeping obstructs from the recoaters in order to aid a wide range of Secondary Coating Line coating diameters. For recoaters having a rotary Proof tester, the inserts are compatible with Fiber covering diameters in a range from 125 µm to 900 µm. For recoaters using a linear Proof tester, the inserts cover a range for Fiber coatings from Ø250 µm to Ø900 µm.